• ESPEC ENGINEERING VIETNAM CO.,LTD.
  • 024-7300-7486
Inquiry / Document request

LARGE CAPACITY THERMALSHOCK CHAMBER AIR TO AIR

  1. Home
  2. Product
  3. Large Capacity ThermalShock Chamber Air to Air

Today, the automotive industry accelerates electronic multi-functions. According to this trend, safety standards such as ISO26262 and IEC61508 require high environmental stress that is generated by thermal shock chambers for higher reliability of vehicle equipments.

It is available from 1,100-liter, 1,650-liter, and 2,200-liter models. Unlike conventional chambers, this enables thermal shock testing of large automobile parts (e.g. Li-ion battery modules, electric turbochargers, intercoolers, radiators, and inverters for vehicles), large flat panel displays, and relatively large products that could not be previously tested due to their size or weight. This is ideal for customers who need to quickly test large amounts of specimens, such as for quality inspection during the production process.

Large test area

Available following three large-capacity models.

TSA-1100-W　1000(W)×1100(H)×1000(D)mm
TSA-1650-W　1500(W)×1100(H)×1000(D)mm
TSA-2200-W　2000(W)×1100(H)×1000(D)mm

TSA series common operability

Basic control method is common by using the same interactive touch panel instrumentation as that of the standard TSA series for easy operation.

Considerable design for installation

Large-capacity chambers bring with them the problems of installation space. This chamber has been designed to reduce protrusions as much as possible. The chamber consists of separable unit structure, which facilitates installation work. In addition, the refrigerator can be accessed from the rear for ease of maintenance.

Easy specimen carry-in & carry-out

In the testing of some specimens, such as battery modules, the weight of specimens increases since not only is the size of specimen large but also the loading capacity is large.

  • Designed lower floor of the test area by placing the hot chamber on top and the cold chamber in the rear.
  • Openings for a specimen loading hand lift truck.
  • Doorstopper prevents accidents when closing the door during operation.

Safety devices

Various safety devices are available in case og testing second batteries and fuel cells that are flammable or gaseous.

Typical devices:

  • Pressure release vent
  • Gas detector
  • Forced ventilation system
  • CO2 gas extinguisher
  • Safety lock mechanism

* Be sure to install the safety device if the chamber is used for charge-discharge testing or testing Li-ion battery packs or Li-ion battery modules.

Chamber structure

Main specifications

Model TSA-1100S-W TSA-1650S-W TSA-2200S-W TSA-1100H-W TSA-1650H-W TSA-2200H-W
Method Two-zone by means of damper switching (three-zone optional)
High-temp. exposure range +60°C to +150°C +60°C to +180°C
Low-temp. exposure range -50°C to -10°C -60°C to -10°C
Hot chamber max pre-heat setting temperature +180°C +200°C
Hot chamber temperature heat-up time Within 40 minutes from ambient temperature to +180°C Within 30 minutes from ambient temperature to +200°C
Cold chamber min pre-cool setting temperature -65°C -75°C
Cold chamber temperature pull-down time Within 150 minutes from ambient temperature to -65°C Within 150 minutes from ambient temperature to -75°C Within 80 minutes from ambient temperature to -75°C Within 90 minutes from ambient temperature to -75°C
Temperature recovery time
  • Two-zone
  • High-temperature exposure: +85°C, 30 min.
  • Low-temperature exposure: -40°C, 30 min.
  • Power supply voltage: 200 V AC
  • Sensor position: upstream
  • Recovery rate: within 10 minutes
  • Two-zone
  • High-temperature exposure: +150°C, 60 min.
  • Low-temperature exposure: -50°C, 60 min.
  • Power supply voltage:
    200 V AC, 3 ohm, 3W, 50/60 Hz (Supporting any power supply voltage as an option)
  • Sensor position: upstream
  • Recovery rate: within 10 minutes
Specimen (iron kg) 50kg 100kg 100kg 50kg 100kg 100kg
Test area W1000mm
H1100mm
D1000mm		 W1500mm
H1100mm
D1000mm		 W2000mm
H1100mm
D1000mm		 W1000mm
H1100mm
D1000mm		 W1500mm
H1100mm
D1000mm		 W2000mm
H1100mm
D1000mm
Outside dimensions W2120mm
H1990mm
D2883mm		 W2620mm
H1990mm
D2883mm		 W3120mm
H1990mm
D2972mm		 W2120mm
H1990mm
D2883mm		 W2620mm
H1990mm
D2883mm		 W3120mm
H1990mm
D2972mm
Weight Approx. 3,400kg Approx. 3,700kg Approx. 3,900kg Approx. 3,500kg Approx. 4,200kg Approx. 4,300kg
Power supply voltage 200 V AC, 3 ohm, 3W, 50/60 Hz (Can support any power supply voltage as an option)
Maximum current value 125 180 198 172 270 310
Cooling water volume
(25°C water) L/hr		 1540 2400 2400 2400 4800 4800
Cooling water volume
(32°C water) L/hr		 2800 4440 4440 4440 8880 8880
Piping connection port diameter 32A 32A 32A 32A 50A 50A

Example of custom Sliding door 動画

* For product specifications other than those above, we will make the most suitable suggestion based on your testing requirements. Please contact our sales representatives.

Examples

· Large Capacity Thermal Shock Chamber + LLC circulator
· -40°C ⇔ ＋85°C Test area recovery time 5 min,
exposure time 30 min		  
· +30°C ⇔ +200°C Test area recovery time 5 min Specimen:
heat exchanger around in-vehicle engine
· -30°C ⇔ +110°C Test area recovery time 5 min,
exposure time 60 min		 Specimen: engine cover for vehicles

* Please contact our sales representatives for more information on support for other testing standards, compatibility with system devices, and support for testing standards of automotive components including JASO D014.

* Please contact our sales representatives for more information on the conductor resistance evaluation system (AMR) and compatibility with various system devices. We will make the most suitable suggestion for the evaluation of Li-ion batteries based on our abundant experience.

* This chamber can be used in combination with vibration generators.

Top